Slick
New Member
Human Garbage Disposal
Posts: 563
|
Post by Slick on Jan 18, 2009 0:57:24 GMT -5
After a ton of debating, I decided that I'm just going to downgrade to an M120 spring with a TB barrel. For WHFO2, I'm just going to put in the M120 spring, later on adding the TB barrel.
Now the question, what brand spring to use... Definitely not Systema, as it didn't go over too well with my previous MP5. I'm thinking Guarder or PDI - not sure. I just want the equivalent of an M120 (around 380 to 390 constant fps with .20's - about 360 with .25's).
This would enable me to be well under the limits for most events.
Thanks, Dom
By the way, I will be doing the spring replacement on my own =D Wish me luck! (Gonna need it)
|
|
|
Post by Stalion on Jan 18, 2009 2:11:50 GMT -5
Blade had used Guarder springs in all of my guns and Ive never have a problem. Also Dom get in touch with Brandon, he can probably help you with the spring change.
|
|
Slick
New Member
Human Garbage Disposal
Posts: 563
|
Post by Slick on Jan 18, 2009 10:11:48 GMT -5
Sounds good. Thanks Vito. I'll get in touch with him.
|
|
Slick
New Member
Human Garbage Disposal
Posts: 563
|
Post by Slick on Jan 21, 2009 20:38:26 GMT -5
By the way, I just opened up the gearbox to my backup AEG (Echo 1 STAG-15 M4 shootin 380 w/.20's) and reassembled and it's good to go. I just wanted to practice for my KWA when my spring comes in. All is well. It was a little of a pain to get together, but it went pretty well.
|
|